SERVER
The following files must be in the program directory of the SyncServer (OpenSSL)
1.ssleay32.dll
2.libeay32.dll
In addition, a certificate and a key file are required in the program directory.
1.xtsync_certificate.crt
2.xtsync_privatekey.pem
The following lines must be added in the xtwebserver.ini. This can also be conveniently done via the dialogue below.
[Certificate]
SCERT = xtsync_certificate.crt
RSAkey = xtsync_privatekey.pem
ROOTCERT = xtsync_certificate.crt
PASSWORD = kBorkR9Di4UtjRcpjaG
NOTE: A certificate check will not be performed when connecting via a self-signed SSL certificate. The SSL connection is for encrypted transmission only. Therefore, it is not necessary to create your own certificate.
In the configuration of the SyncServer the option "Use SSL" has to be set.
The password for the private keyfile is: xtsyncpassword
CLIENT (WINDOWS)
In the program client (xperttimer.exe) must have the following files (OpenSSL)
1.ssleay32.dll
2.libeay32.dll
On the client, the option "Use SSL" must be set in the connection settings to the SyncServer.
If an optional cross-check of the certificate is to be made, the following lines must be entered in the xperttimer.ini. You can also transfer these lines from xtwebserver.ini.
[Certificate]
SCERT=xtsync_certificate.crt
RSAKEY=xtsync_privatekey.pem
ROOTCERT=xtsync_certificate.crt
PASSWORD=kBorkR9Di4UtjRcpjaG
CLIENT (ANDROID)
On the mobile device, the "Use SSL" option must be set in the connection settings to the SyncServer